Preparación de superficies (pulido / lijado). Descontaminación. Aplicación de llenado.
No | Step | Description | Time necessary |
1. | Laser scan | Scan the blade before the repair and generate a 3D model of the blade in 12 μm (micrometer) precision to assess the blade condition and adjust the tools. | 15min |
2. | Grinding and sanding | Remove the damaged/eroded layer to allow for application of a new layer of filler. | 10-20min |
3. | Decontamination | Clean up the blade and prepare it for filler application to provide maximal durability of the material applied later. | 10-20min |
4. | Filler application and profiling | Apply an exact amount of the filler material on the blade and profile it in a high-precision. | 10-20min |
5. | Laser scan | Scan the blade after the repair to validate the result and guarantee the highest quality. | 15min |
- | Changing the robotic arms | After each of the steps it is necessary to change the robotic arms. Each of the robotic arms perform different task | 5min x 4 |
- | Total time | Time necessary to perform the whole process for one blade | 1.5h - 2h |